Popis
The engine comes with 1m cable without a connector.
Flange: Nema 17
Engine height: 48 mm
Step: 1.8 °
Weight: 0.3 kg
Warning:
The product may require professional assembly, not a separate functional total.
Alternativní produkty
-
Přidat k OblíbenýmStep motor 0.28 nm
The 0.28nm stepper engine serves as an alternative replacement for SX17-1003VLQCEF engines. The engine is suitable for use on XYZ axes for extruder we recommend a stronger version.
Dočasně vyprodáno
zł59,33
-
Přidat k OblíbenýmStep motor 0.56 nm
The 0.56nm stepper engine serves as an alternative replacement for SX17-1005VLQCEF engines. The engine is suitable for use on all axes.
Dočasně vyprodáno
zł50,83
-
Přidat k OblíbenýmStep motor 0.44 nm
Step motor with a thickness of 0.44 nm. The engine is suitable for use on XYZ axes for extruder we recommend a stronger version, but this engine can also be used.
Dočasně vyprodáno
zł50,83
-
Přidat k OblíbenýmStepper motor cable DUPONT
Cable for motors 0.28 Nm, 0.44 Nm, 0.56 Nm. 1 meter cable to the stepper motor. The cable is equipped with terminals. On one side the end for the motor, on the other side DUPONT (mainly RAMPS plates).
Skladem 10 až 100 ks (56 ks)
zł6,63
-
zł16,83
40%
Přidat k OblíbenýmStep motor 28byj-48
5 PIN Step Motor 28Byj -48 - 4 phases. Miniature step motor 28byj-48 with ULN2003 control circuit is suitable for many projects. Miniature dimensions, 12V power supply, LED indication.
Dočasně vyprodáno
zł10,03
zł16,83 Sleva 40.4%
-
Přidat k OblíbenýmCork shock absorber for step engines 3 mm
Cork shock absorber for step engines with NEMA17 flange measures 42 x 42 x 3 mm. It is used to reduce the transmission of vibration to the printer frame, reduce heat transfer from hot engines to the plastic part of the frame, reduced resonance from the engine, fewer sounds from the printer.
Dočasně vyprodáno
zł4,93
-
Přidat k OblíbenýmStep motor 0.22 nm
The 0.22 Nm stepper motor serves as an alternative replacement for SX17-1003VLQCEF engines. The engine is suitable for use on XYZ axes for extruder we recommend a stronger version.
Dočasně vyprodáno
zł37,23
-
Přidat k OblíbenýmStep motor 0.42 nm
Step motor with a thickness of 0.42nm. The engine is suitable for use on all axes.
Dočasně vyprodáno
zł59,33