na3D
507 produktů
-
Přidat k OblíbenýmBall bearing 606ZZ
Bearing with one row of balls in deep orbits. It transmits radial and axial load. Size 6x17x6. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem < 10 ks (1 ks)
zł2,55
-
Přidat k OblíbenýmBall bearing 624ZZ
Ball bearing 624 ZZ with an inner diameter of 4mm. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem < 10 ks (9 ks)
zł3,23
-
Přidat k OblíbenýmBall bearing with flange F6000ZZ
Ball bearing with flange size 10x26x8 mm. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem < 10 ks (6 ks)
zł8,33
-
Přidat k OblíbenýmLM20UU linear bearing
Extended linear bearing suitable for assembly into a wide range of printers. Suitable for guide rods with a diameter of 20 mm. (The product can be ordered by 1 pc.)
Skladem < 10 ks (10 ks)
zł21,93
-
Přidat k OblíbenýmLM6UU linear bearing
Linear bearing suitable for mounting in a wide range of printers. (The product can be ordered after 1 piece, the photo is only illustrative.)
Skladem < 10 ks (3 ks)
zł4,93
-
Přidat k OblíbenýmSilicone Protection of Volcano Hotend
Protection against dirt aluminum cube Volcano.
Skladem < 10 ks (8 ks)
zł8,33
-
Přidat k OblíbenýmTrolley for linear lines
Additional trolley for linear lines. MGN12H size, MGN12C, MGN9H, MGN9C - the difference in length and width see the gallery.
Skladem < 10 ks
zł50,83
-
Přidat k OblíbenýmMK10 all-metal upgrade
For Flashforge printers.
Skladem < 10 ks (10 ks)
zł42,33
-
Přidat k OblíbenýmTorque wrench with nozzle attachments
With a torque wrench, you can tighten the nozzle quickly and accurately. You will improve the quality of the hotend assembly and prevent unwanted filament leakage around the thread. Using a preset torque, always tighten the nozzle with the same force.
Skladem < 10 ks
zł135,83
-
Přidat k OblíbenýmBrass Bowden Quick Coupler PC4-M6 CR10
Pneumatic quick coupler for 4 mm diameter bowden - 2.5 mm internal bore, M6 thread.
Skladem < 10 ks (1 ks)
zł10,03
-
Přidat k OblíbenýmPad spring for MK3
Spring for heated pad MK3. Length 25 mm. Outer diameter 8 mm, inner diameter 4 mm. (The product can be ordered 1 piece at a time, the photo is only illustrative.)
Skladem < 10 ks
zł4,93
-
Přidat k OblíbenýmCR10S for the nozzle
Spare nozzle CR10S Pro for Filaments 1,75. The nozzle has a finer thread than the classic M6 nozzles.
Skladem < 10 ks
zł21,93
-
Přidat k OblíbenýmHotend 2 V nozzle 2 V 1 0.4 / 1.75 mm
Spare nozzle for Hotend 2 V 1 0.4 / 1.75 mm.
Skladem < 10 ks (8 ks)
zł16,83
-
Přidat k OblíbenýmMK8 steel nozzle
Steel nozzle with M6 thread. Available in size 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.8 mm.
Skladem < 10 ks
zł16,83
-
Přidat k OblíbenýmTrimming knife and spare blades
The set is designed especially for accurate plastic trimming. Suitable especially for PLA, PETG, ABS, PEI, Peek, carbon fiber, as well as stainless steel, aluminum alloy, rubber. The product is available in three variants: only knife / spare blade / knife and spare blades.
Skladem < 10 ks
od zł33,83